Newen Seat Cutting Machine

See machine in action at:

http://www.youtube.com/NewenInc

Performance can be gained from valve seat profiles alone. With this machines unique single point fixed turning, touch screen programming, angles and even radiuses can be varied by hundredths of a degree.

We can tailor a profile to suit individual cylinder head requirements and provide a printout our your seat profile, on request.

Superflow 600 Flowbench

When Newen Valve Seat profiles are tested on this machine, an optimal flow co-efficiency can be reached.

Back to back flowtesting before and after valve seat profiles are machined on the Newen, results can be measured to obtain an optimal profile.

NEW!

Easy-Run Engine Test Stand

Hear your engine run before it leaves our workshop.

• Engine Testing
• Record Oil Pressure
• Set Ignition Timing
• Peace of mind when you install and turn the key.

Oil Pressure, engine temperature, RPM and manifold vacuum are all monitored.

Sunnen CV 616 Hone

A world leader in honing technology

Torque Plate Honing

When cylinders are bored and honed they are round and parallel until main bearing caps and cyl head are torqued in place and distortion occurs.

Installing a torque plate to the block and torquing main caps prior to honing duplicates distortion - so when torquing is carried out during assembly, maximum cylinder seal is ensured.

Custom RB Girdle & Main Caps